MIPS Atlas 5Kc Development Board

The MIPS Atlas 5Kc Development Board platform, based on the MIPS64 5Kc is supported by both eCos and RedBoot.

Supported devices

Device drivers are included for:

• Diagnostic (polled) serial I/O
• Interrupt-driven serial I/O
• Ethernet
• FLASH

Availability

Hardware

Hardware is available from:

Software

Source code for both eCos and RedBoot is available publically from eCos releases 2.0 and onwards, as well as from the anonymous CVS repository.

Documentation

Specifications are available for the processor and are available on-line from the manufacturer's web site.

Instructions for installing RedBoot on the Atlas 5Kc can be found in the RedBoot User's Guide. Board specific instructions, including installation instructions can be found here within the User's Guide.

Instructions for installing and using eCos on the Atlas 5Kc are available here.

The most recent version of the full documentation set may be found on-line here.

RedBoot support

Prebuilt binaries of RedBoot are available for download for both ROM and RAM startup. Some necessary support files may also be included. Consult the RedBoot documentation on how to use these binaries.

Thanks

The eCos port, based on the original Red Hat RedBoot port, was contributed by eCosCentric