eCos Home

RedBoot Home


About eCos

Supported Hardware

Downloading and Installation

Documentation

FAQ

Mailing lists

Problems

Licensing

Anonymous CVS

Contributions and Development Projects

Legal

eCos

STMicroelectronics STM3220G-EVAL evaluation board


The STMicroelectronics STM3220G-EVAL evaluation board platform, based on the STMicroelectronics STM32F207IGH6 is supported by both eCos and RedBoot.

The support for this platform was contributed to eCos, and the eCos maintainers are grateful on behalf of the open source community to all contributors. Note that some contributed ports may not have been tested.

Supported devices

Device drivers are included for:

  • Diagnostic (polled) serial I/O
  • Interrupt-driven serial I/O
  • Ethernet
  • FLASH
  • SPI

Availability

Hardware

Hardware is available from:

STMicroelectronics, Inc.
Contact URL: http://www.st.com

Software

Source code for both eCos and RedBoot is available publically from the anonymous CVS repository only.

Documentation

Specifications are available for the processor and platform and are available on-line from the manufacturer's web site.

Instructions for installing RedBoot on the STM3220G-EVAL can be found in the RedBoot User's Guide.

Thanks

Thanks to eCosCentric for their contribution of this board port, STM32 support, and the architectural port. Note that eCosCentric include documentation on their own website for this platform which will not fully correspond to the public eCos support.

Thanks to Jerzy Dyrda for the STM32 ethernet driver.