Intrinsyc CerfCube

The Intrinsyc CerfCube platform, based on the Intel StrongARM SA-1110 is supported by both eCos and RedBoot.

The support for this platform was contributed to eCos, and the eCos maintainers are grateful on behalf of the open source community to all contributors. Note that some contributed ports may not have been tested.

Supported devices

Device drivers are included for:

• Diagnostic (polled) serial I/O
• Interrupt-driven serial I/O
• Ethernet
• FLASH
• USB
• PCMCIA/Compact Flash
• Watchdog

Availability

Hardware

Intrinsyc products are available from Intrinsyc offices worldwide.
Or e-mail <info@intrinsyc.com>.

Software

Source code for both eCos and RedBoot is available publically from eCos releases 2.0 and onwards, as well as from the anonymous CVS repository.

Documentation

Specifications are available for the processor and platform and are available on-line from the manufacturer's web site.

Instructions for installing RedBoot on the CerfCube can be found in the RedBoot User's Guide. Board specific instructions, including installation instructions can be found here within the User's Guide.

RedBoot support

Prebuilt binaries of RedBoot are available for download for both ROM and RAM startup. Some necessary support files may also be included. Consult the RedBoot documentation on how to use these binaries.

Thanks

Thanks to Intrinsyc who contributed the initial port.