ARM Integrator Development Board

The ARM Integrator Development Board platform, based on the ARM966E-S is supported by both eCos and RedBoot.

The support for this platform was contributed to eCos, and the eCos maintainers are grateful on behalf of the open source community to all contributors. Note that some contributed ports may not have been tested.

Supported devices

Device drivers are included for:

• Diagnostic (polled) serial I/O
• Interrupt-driven serial I/O
• Ethernet
• FLASH
• PCI

Availability

Hardware

ARM development hardware may be purchased on-line here.

Software

Source code for both eCos and RedBoot is available publically from eCos releases 2.0 and onwards, as well as from the anonymous CVS repository.

Documentation

Specifications are available for the processor and platform and are available on-line from the manufacturer's web site.

Instructions for installing RedBoot on the Integrator can be found in the RedBoot User's Guide. Board specific instructions, including installation instructions can be found here within the User's Guide.

Thanks

Thanks to Philippe Robin at ARM who contributed the initial port.