load [-v ] [-d ] [-r ] [-m [[xmodem | ymodem | tftp | disk | file] ] ] [-h server_IP_address] [-f location] [-b location] [-c channel] [file_name]
|-v||Boolean||Display a small spinner (indicator) while the download is in progress. This is just for feedback, especially during long loads. Note that the option has no effect when using a serial download method since it would interfere with the protocol.||quiet|
|-d||Boolean||Decompress data stream (gzip data)||non-compressed data|
|-r||Boolean||Raw (or binary) data. -b or -f must be used||formatted (S-records, ELF image, etc)|
|-m tftp||Transfer data via the network using TFTP protocol.||TFTP|
|-m http||Transfer data via the network using HTTP protocol.||TFTP|
|-m xmodem||Transfer data using X-modem protocol.||TFTP|
|-m ymodem||Transfer data using Y-modem protocol.||TFTP|
|-m disk||Transfer data from a local disk.||TFTP|
|-m file||Transfer data from a local filesystem such as JFFS2 or FAT.||TFTP|
|-h server_IP_address||Numeric IP or DNS name||The IP address of the TFTP or HTTP server.||Value set by ip_address|
|-b location||Number||Address in memory to load the data. Formatted data streams will have an implied load address which this option may override.||Depends on data format|
|-f location||Number||Address in flash to load the data. Formatted data streams will have an implied load address which this option may override.||Depends on data format|
|-c channel||Number||Specify which I/O channel to use for download. This option is only supported when using either xmodem or ymodem protocol.||Depends on data format|
|file_name||String||The name of the file on the TFTP or HTTP server or the local disk. Details of how this is specified for TFTP are host-specific. For local disk files, the name must be in disk: filename format. The disk portion must match one of the disk names listed by the disks command.||None|
The load command is used to download data into the target system. Data can be loaded via a network connection, using either the TFTP or HTTP protocols, or the console serial connection using the X/Y modem protocol. Files may also be loaded directly from local filesystems on disk. Files to be downloaded may either be executable images in ELF executable program format, Motorola S-record (SREC) format or raw data.
Note: When downloading an ELF image, RedBoot will forcibly terminate the transfer once all the relevant (loadable) ELF sections have been received. This behaviour reduces download time when using the X/Y modem protocol over a slow serial connection. However, the terminal emulator may report that the transfer is incomplete and has been cancelled. Such messages are normal and may be ignored.
Download a Motorola S-record (or ELF) image, using TFTP, specifying the base memory address.
RedBoot> load redboot.ROM -b 0x8c400000 Address offset = 0x0c400000 Entry point: 0x80000000, address range: 0x80000000-0x8000fe80
Download a Motorola S-record (or ELF) image, using HTTP, specifying the host [server] address.
RedBoot> load /redboot.ROM -m HTTP -h 192.168.1.104 Address offset = 0x0c400000 Entry point: 0x80000000, address range: 0x80000000-0x8000fe80
Load an ELF file from /dev/hda1 which should be an EXT2 partition:
RedBoot> load -mode disk hda1:hello.elf Entry point: 0x00020000, address range: 0x00020000-0x0002fd70
Load an ELF file from /jffs2/applications which should be a directory in a JFFS2 filesystem:
RedBoot> load -mode file /jffs2/applications/hello.elf Entry point: 0x00020000, address range: 0x00020000-0x0002fd70