[Bug 1000177] New: IXDP425 2.6.10 Kernel not booting with error: a

[bugzilla at ecoscentric dot com]

http://bugs.ecos.sourceware.org/show_bug.cgi?id=1000177

           Summary: IXDP425 2.6.10 Kernel not booting with error: a
           Product: eCos
           Version: unknown
          Platform: Other
        OS/Version: ARM
            Status: UNCONFIRMED
          Severity: normal
          Priority: normal
         Component: RedBoot
        AssignedTo: gary@mlbassoc.com
        ReportedBy: bokathc@alltel.net
         QAContact: ecos-bugs@sources.redhat.com


I have been trying to find information regarding an error that redboot is giving
me, after trying to boot a 2.6.10 kernel. Built the kernel using gcc 3.4.2
compiled from buildroot distro, using arm big endian, along with busybox etc.
The error that redboot is returning is 'a'. Does anyone have any ideas/info?

The dump is provided below.

thanks




+Ethernet eth0: MAC address 00:60:b3:1b:fa:20
IP: 192.168.1.35/255.255.255.0, Gateway: 192.168.1.90
Default server: 192.168.1.90, DNS server IP: 0.0.0.0
                                                                               
                                             
RedBoot(tm) bootstrap and debug environment [ROM]
Red Hat certified release, version 1.92 - built 10:44:29, Apr  9 2004
                                                                               
                                             
Platform: IXDP425 Development Platform (XScale)
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.
                                                                               
                                             
RAM: 0x00000000-0x10000000, 0x0001f9b8-0x0ffd1000 available
FLASH: 0x50000000 - 0x50800000, 64 blocks of 0x00020000 bytes each.
                                                                               
                                             
Bootcode Version 1.9 2004/04/08
== Executing boot script in 2.000 seconds - enter ^C to abort
RedBoot> load -r -v -b 0x01600000 "zImage"
Using default protocol (TFTP)
|
Raw file loaded 0x01600000-0x01742d83, assumed entry at 0x01600000
RedBoot> load -r -v -b 0x00800000 "root_fs_armeb.jffs2"
Using default protocol (TFTP)
|
Raw file loaded 0x00800000-0x00b38a97, assumed entry at 0x00800000
RedBoot> fis list
Name              FLASH addr  Mem addr    Length      Entry point
RedBoot           0x50000000  0x50000000  0x00060000  0x00000000
RedBoot config    0x507C0000  0x507C0000  0x00001000  0x00000000
Config backup     0x507C1000  0x507C1000  0x00001000  0x00000000
FIS directory     0x507E0000  0x507E0000  0x00020000  0x00000000
RedBoot> go -n 0x01600000
Uncompressing
Linux........................................................................................
done, booting th.                                                              
                                                              
                                                                               
                                             
Error: a



------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.