This is the mail archive of the
ecos-bugs@sourceware.org
mailing list for the eCos project.
[Bug 1000313] unable to execute linux kernel with Redboot
- From: bugzilla-daemon at ecoscentric dot com
- To: ecos-bugs at sources dot redhat dot com
- Date: Thu, 21 Sep 2006 14:49:56 +0100 (BST)
- Subject: [Bug 1000313] unable to execute linux kernel with Redboot
http://bugzilla.ecoscentric.com/show_bug.cgi?id=1000313
------- Additional Comments From lexaiu4@mail.ru 2006-09-21 14:49 -------
Trying NPE-B...success. Using NPE-B with PHY 0.
Ethernet eth0: MAC address 00:03:47:df:32:a8
IP: 192.168.0.1/255.255.255.0, Gateway: 192.168.0.1
Default server: 192.168.0.10
RedBoot(tm) bootstrap and debug environment [ROM]
Non-certified release, version UNKNOWN - built 12:08:38, Sep 21 2006
Platform: IXDP425 Development Platform (IXP42X 266MHz) BE
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
Copyright (C) 2003, 2004, 2005, 2006 eCosCentric Limited
RAM: 0x00000000-0x02000000, [0x00029930-0x01fc1000] available
FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each.
RedBoot> load -v -r -m tftp -b 0x1000000 /linux/kernel
/
Raw file loaded 0x01000000-0x010fffff, assumed entry at 0x01000000
RedBoot> exec -b 0x1000000 -l 0 0x1000000
entry=10008000 target=10008000
Uncompressing Linux........................................................
done, booting the kernel.
and hang silently
--
Configure bugmail: http://bugzilla.ecoscentric.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.