This is the mail archive of the ecos-bugs@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[Issue 1000761] eCos support for MPC5xxx MCUs


http://bugzilla.ecoscentric.com/show_bug.cgi?id=1000761





--- Comment #2 from Alex Schuilenburg <alexs@ecoscentric.com>  2009-05-11 19:01:45 ---
-------- Original Message --------
Hi Alex,
thanks for taking care of this. As already told on the phone, here is the port
for the Freescale MPC5xxx devices which support classic PowerPC Instructions.
Due to the missing GNU Compiler for the VLE instruction set, there is no
support for all the devices with the e200z0 core, which only have the VLE
option. The only exception is the MPC551x family, where the main core is
supported in this port, but not the secondary support. It is important to use
the newer GNU Compiler for PowerPC delivered with eCOS 3.0. This will not work
with the older GNU Compiler delivered with eCos 2.0.
Please scroll down to the original email to find the description.

Best regards,

Stefan Singer
EMEA FAE Manager Automotive


-- 
Configure issuemail: http://bugzilla.ecoscentric.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the issue.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]