This is the mail archive of the ecos-bugs@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[Bug 1001368] Availability of port.


Please do not reply to this email. Use the web interface provided at:
http://bugs.ecos.sourceware.org/show_bug.cgi?id=1001368

--- Comment #4 from Bernd Edlinger <bernd.edlinger@hotmail.de> 2012-08-14 12:41:42 BST ---
one more thing:

unless you are certain that the PLL Divider and Multipliers are exactly
configured as initialized by the Atmel Bootloader, you should enable
"Dynamic calculation of baud rate" in "Atmel AT91SAM9 HAL"
then the COM port's baud rate is always correct, as long as the
"main oscillator frequency" setting is correct.

-- 
Configure bugmail: http://bugs.ecos.sourceware.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]