This is the mail archive of the
mailing list for the eCos project.
Sharp LH79520 port?
- From: "Lewin A.R.W. Edwards" <larwe at larwe dot com>
- To: ecos-devel at sources dot redhat dot com
- Date: Sun, 21 Mar 2004 11:36:50 -0500
- Subject: Sharp LH79520 port?
I'm currently negotiating a contract to make a software bundle for a kit
based around the LH79520. This is kind of taking over a
partially-working project - the customer has a working hardware platform
and a working arm-linux port, but I think Linux is overkill for the task
at hand (4M flash/16M RAM/74MHz ARM7) and the customer has, as yet, been
unable to create a critical mass of third-party interest in the project.
My brief is to make some standalone demonstration applications for the
board, which can either be sold as-is as consumer electronics, or used
to attract further third-party development interest. I would prefer to
build on eCos.
Has anyone done work on an LH79520-based port of eCos? I basically need
to know whether I need to build 4-6 weeks porting slack into my
schedule, or whether I can ride someone else's work :) I'm probably
overestimating the porting difficulty, but it's good to be prepared.
-- Lewin A.R.W. Edwards (http://www.zws.com/)
Learn how to develop high-end embedded systems on a tight budget!