This is the mail archive of the
ecos-devel@sourceware.org
mailing list for the eCos project.
Redboot causes PCI abort in Linux Ixp425
- From: Ravi modgekar <ravilm at yahoo dot com>
- To: ecos-devel at sourceware dot org, ecos-discuss at sourceware dot org
- Date: Wed, 15 Mar 2006 22:04:22 -0800 (PST)
- Subject: Redboot causes PCI abort in Linux Ixp425
- Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Reply-To:Subject:To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=jFmUXDy7RdLpFzkpHstI11CtttduNZGczNENCR0OwYnNssTXVAYpXr1rMm58bJLmO54zyrLT3KXDUJsIfqmG3L51kC9qe13Hya3GGVzi7ASwl+QwxgIyxRfyu5Cs4H0Btbn5xwgdDBCJ83/CTld9LsmYa1ZGcKARcEL5FY6Z+Wk= ;
- Reply-to: ravilm at yahoo dot com
Hi,
I have an IXP425 based board based on Gateworks
GW2345 board.This
board already had a redboot image programmed through
which we could
easily load linux and work on it.
Now I have compiled the redboot for our IXP based
board from the
Avila redboot sources.With this newly compiled redboot
I am able to
boot linux, but unfortunately the PCI cribs and the
linux crashes
with PCI abort. The error message being "!!!
abort_handler addr =
0x40015000 ,isr = 0x0 , status = 0x22a0".
Interestingly the same Linux
image works fine with the old redboot ,for which we
don't have the
source code.
Has anybody in this list faced this problem.Am I
missing
configuring something in the Redboot which is causing
the PCI abort.I
have tried with completely disabling PCI interface ,
but I still see
this problem.
any pointers !!!
Regds
Ravi
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com