This is the mail archive of the
mailing list for the eCos project.
Re: Test USB driver for stm32 on stm32 evel board
- From: Chris Holgate <chris at zynaptic dot com>
- To: GaurangT <gtamakuwala at intriguetechsolutions dot com>
- Cc: ecos-devel at ecos dot sourceware dot org
- Date: Tue, 02 Jun 2009 14:36:07 +0100
- Subject: Re: Test USB driver for stm32 on stm32 evel board
- References: <firstname.lastname@example.org>
> I run usbtarget.c program on stm32 evel board and i got no device
> driver for "Red Hat eCos USB test".
Please, if you're going to post to the lists at least take the time to
read any responses before repeat posting. I refer you to my previous
> I got output on hyper terminal and program run on stm32 evel board like
> STM32 USB : Setting USB device address = 1
The fact that Windows is recognizing the device and asking for a driver,
and a valid USB device address is being assigned means that the STM32
driver is basically working. If you must use Windows as your USB host,
you'll now need to put together a USB class driver for a standard device
type which it will recognize. You could try a simple HID, for example.