This is the mail archive of the
mailing list for the eCos project.
Re: eCos GNU tools 4.6.2-20120125 ready for testing
On 2012-03-07 13:12, John Dallaway wrote:
> Hi Alex
> Alex Schuilenburg wrote:
>> The RedBoot issue on the STM3210E-EVAL turned out to be a non-issue.
>> eCos and eCosPro RedBoot are compatible. There was an eCosPro specific
>> issue which I had forgotten about - sorry. The board ran overnight just
>> over 1000 tests in different eCos configurations. There are currently 9
>> failures, listed according to their configuration name in our test farm.
>> As jld knows, when a test fails in the farm it is automatically rerun an
>> additional 2 times to confirm the failure is reproducible. All other
>> tests in these configurations passed.
> Thank you for the info. I assume this was using your own build of GDB.
> Could you switch to arm-eabi-gdb 7.3.1 from the test release for any
> future perms please? With Cortex-M target such as STM3210E-EVAL you will
> need to specify the attached target description file before connecting
> to the target:
> (gdb) set tdesc filename gdb-tdesc-cortexm-fpa.xml
> I can confirm that this is working for me.
Given this comment in
http://bugs.ecos.sourceware.org/show_bug.cgi?id=1001468#c30 I assume at
some point a newer toolchain will be provided which has a gdb with the
'g' packet length resolved?
If so I would prefer rather to wait until the newer toolchain is
provided since the tests would need to be re-run. The farm has just hit
the 9000 test mark for this platform with no new additional test
failures, other than the same tests already reported in different
Managing Director/CEO eCosCentric Limited
** Visit us at the ESC Expo at Design West in San Jose **
** 27-29 March, McEnery Convention Center - Stand #846 *