This is the mail archive of the ecos-discuss@sourceware.cygnus.com mailing list for the eCos project. See the eCos home page for more information.
Actually, I was interested in doing the port myself. The mvme27xx is a PowerPC based VME SBC. -----Original Message----- From: Bart Veer <bartv@cygnus.co.uk> To: klink@mediaone.net <klink@mediaone.net> Cc: ecos-discuss@cygnus.com <ecos-discuss@cygnus.com> Date: Friday, December 11, 1998 11:18 AM Subject: Re: [ECOS] mvme2700 >>>>>> "Robert" == Robert Klinkhammer <klink@mediaone.net> writes: > > Robert> Is anyone working on the motorola mvme27xx series? > >Searches on the both the Motorola web site and on altavista have not >revealed anything about the mvme27xx series, so I do not know exactly >what that board provides. > >If it involves a 68K then eCos is not yet available for that >architecture, and a port by Cygnus to that architecture is not under >consideration. > >If it involves a PowerPC processor then I would need to know which >one. The only PowerPC processor currently supported is the MPC860. >Ports to some other members of the PowerPC architecture are under >consideration. > >To the best of my knowledge Cygnus has not yet been asked to do a port >to specific Motorola boards. The sourceware FAQ gives some information >about what is involved if you were interested in doing this yourself: >http://sourceware.cygnus.com/ecos/faq.html. I am not aware of anybody >outside Cygnus doing a port to these boards, but there seem to be >quite a few board ports happening at the moment. > >Bart Veer // eCos net maintainer >