Re: [ECOS] Library Circularity Question

[Timothy Konkle <tkonkle@cisco.com>]

John,

I believe the need for multiple -lgcc arguments is due to the single pass 
linker nature. To deduce further, try adding in one library at a time in the
link and then use nm to list undefined references (the "U" symbol in second
column). The first -lgcc resolved some symbols but left others undefined,
the -lc resolved some of the previous -lgcc symbols but then now requires
some OTHER symbols that were really defined in the -lgcc (libgcc.a) library.
(I refer generically to gnu "nm", where it may be sh-hms-nm or such, following
the platform-architecture-name convention.)

--Tim Konkle
System Software and Tools
Cisco Systems, Inc.

> From Jmills@TGA.com Wed Jul  7 15:36:20 1999
> X-SMAP-Received-From: outside
> Mailing-List: contact ecos-discuss-help@sourceware.cygnus.com; run by ezmlm
> Delivered-To: mailing list ecos-discuss@sourceware.cygnus.com
> From: John Mills <Jmills@TGA.com>
> To: "'eCos Discussion'" <ecos-discuss@sourceware.cygnus.com>
> Cc: John Mills <Jmills@TGA.com>
> Date: Wed, 7 Jul 1999 18:40:46 -0400
> MIME-Version: 1.0
> Subject: [ECOS] Library Circularity Question
> 
> I ran into something I don't understand while linking a "toy" C++ example as
> a sh-elf executable. I am using sh-hms libraries built out of
> 'ecosSWtools-990319', and targeting the Hitachi EDK7045F development board.
> 
> Originally I provided a dummy 'delete' operator to satisfy linkage of a
> pro-forma C++ destructor. The problem came up when I tried to find a linkage
> sequence which would actually implement some dynamic storage allocation and
> deallocation. Linking with "-lgcc"
> [from "<tooldir>/lib/gcc-lib/sh-hms/2.9-ecosSWtools-990310/libgcc.a"] left
> unresolved symbols; adding a trailing link command "-lc" didn't resolve all;
> but adding a _second_ "-lgcc" after "-lc" resolved all symbols:
>     $(XLD) $(LDFLAGS) -o $@ ${OBJS} -lgcc -lc -lgcc
> 
> Any suggestions what is happening here?
> 
> Thanks -
> 
>   John Mills, Sr. Software Engineer
>   TGA Technologies, Inc.
>   100 Pinnacle Way, Suite 140
>   Norcross, GA 30071-3633
>   e-mail: jmills@tga.com
>   Phone: 770-421-2100 ext.124 (voice)
>          770-449-7740 (FAX)