This is the mail archive of the
ecos-discuss@sourceware.cygnus.com
mailing list for the eCos project.
Re: Ecos Port to PPC509/PPC555
- To: ecos-discuss at sourceware dot cygnus dot com
- Subject: Re: [ECOS] Ecos Port to PPC509/PPC555
- From: Sergei Organov <osv at Javad dot RU>
- Date: 22 Sep 1999 13:00:50 +0400
- References: <37E80554.7D56118D@danlawinc.com>
Hi,
I also have MPC509 target as well as MPC555 evaluation board. Current
eCos doesn't have ready support for these processor(s). The main
trouble in porting eCos to this family is absence of floating point
support in eCos. While FP support is in TO-DO list, it seems (based on
current CVS snapshot) that actual work in this direction isn't yet
started. If you don't need FP, then porting seems to be relatively
easy.
I'd like to participate in implementation of FP support for eCos. What
is current status? Does anybody at Cygnus take care of FP?
Regards,
Sergei Organov.
Ramana <ramanabv@danlawinc.com> writes:
> Hi,
> The PPC509/PPC555 are motorola processors of the power pc family. Does
> any body know if the powerpc port can operate on these processors. If
> not is a specific port available.
> Thanks for the help
> ramana b.v