This is the mail archive of the
ecos-discuss@sourceware.cygnus.com
mailing list for the eCos project.
Port to uCsimm (uC68EZ328)?
- To: ecos-discuss at sourceware dot cygnus dot com
- Subject: [ECOS] Port to uCsimm (uC68EZ328)?
- From: profesor at sidehack dot sat dot gweep dot net
- Date: Thu, 30 Dec 1999 19:17:22 -0500 (EST)
Is anybody working on a port to the uCsimm? It's basically a Motorola
68EZ328 dragonball with some dram, flash, and 10baseT enet controller
in a 30 pin simm form factor. It was designed to run Linux. See
www.uclinux.com for info.
I am using it for a robot controller, but I'm coming to the realization
that Linux is just too big for what I want to do. It's hard to get
good timing for motor control, etc, from it when running Linux. So
I'm going to take a whack at porting eCos to it, but before I get too
far I wanted to see if anyone else is working on any ports to it,
or at least any 68k ports.
Thanks,
-Matt