This is the mail archive of the ecos-discuss@sourceware.cygnus.com mailing list for the eCos project.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]

Re: Serial I/O on the MBX860

To: Jonathan Larmour <jlarmour at redhat dot co dot uk>, ecos-discuss at sourceware dot cygnus dot com
Subject: Re: [ECOS] Serial I/O on the MBX860
From: Erik Theisen <etheisen at mindspring dot com>
Date: Thu, 03 Feb 2000 15:25:14 -0500
Organization: Glenayre Electronics, Inc.
References: <Pine.LNX.4.10.10002030514330.14080-100000@gemini.home.net> <3899A409.6BD5DF60@redhat.co.uk>

Jonathan Larmour wrote:

> I think I know the eCos 1.2.1 problem you mean - it was because of a poorly
> chosen default for CYGDAT_LIBC_STDIO_DEFAULT_CONSOLE, which was set to
> /dev/haldiag instead of /dev/ttydiag. Try the second one and see what
> happens. If it's still broke, then I'll have a closer look :-).

That is fixed in anoncvs.  I am using the later device
as specified in libc.h.

I beleive there is a bad memory access going on.  See
my previous post to ecos-discuss.

Is getc implemented for the MBX's QUICC driver?

Erik

References:
- Re: Serial I/O on the MBX860
  - From: Jamie Guinan
- Re: Serial I/O on the MBX860
  - From: Jonathan Larmour

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]