This is the mail archive of the
ecos-discuss@sourceware.cygnus.com
mailing list for the eCos project.
Re: cannot find config.sub
- To: "ecos-discuss at sourceware dot cygnus dot com" <ecos-discuss at sourceware dot cygnus dot com>
- Subject: Re: [ECOS] cannot find config.sub
- From: "Kenneth Porter" <kenneth_porter at kensingtonlabs dot com>
- Date: Wed, 03 May 2000 04:30:24 -0700
- Reply-To: "Kenneth Porter" <kenneth_porter at kensingtonlabs dot com>
On Sun, 16 Apr 2000 18:09:09 CDT, Rosimildo daSilva wrote:
> I bet you it is some "CRLF" --> "LF" cleanup. CygWin is
> totally crazy on this regard.
>
> Try to cleanup the files that you changed, specially
> configuration files, using some utility such as
> dos2unix.exe.
>
> I usually use this:
>
> find -mtime -1 -type f -exec dos2unix {} \;
Did this ever get resolved? I finally got around to installing 1.3.1
and ran into this one, as there's no hint about this on the PPC install
page. Fortunately I had my archive of the mailing list and quickly
found this thread.
As you may recall, eCos recommends text mode mounts, but Cygwin 1
defaults to binary mounts, and some problem in the gcc patch process
results in the 14 patched files being in DOS mode. Alas, dos2unix isn't
part of Cygwin, so I had to go track down a copy and install it, and
then add the above find command right after the patch command in the
installation instructions. Right now I'm waiting for powerpc-eabi-gcc
to finish building.
Kenneth Porter
Kensington Laboratories, Inc.
mailto:kenneth_porter@kensingtonlabs.com
http://www.kensingtonlabs.com