This is the mail archive of the
ecos-discuss@sourceware.cygnus.com
mailing list for the eCos project.
Re: Error generating arm-elf-gcc
Thank you for your soon answer.
I've tried to reconfigure and recompile both binutils and gcc but the
compilation aborted with the same error.
In attach you can find the configure.out and make.out generated by the
configuration and compilation processes
Many thanx
Alessandro Pinto
----- Original Message -----
From: "Jonathan Larmour" <jlarmour@redhat.co.uk>
To: "Alessandro Pinto" <apinto@parades.rm.cnr.it>
Cc: <ecos-discuss@sourceware.cygnus.com>
Sent: Wednesday, May 31, 2000 5:32 PM
Subject: Re: [ECOS] Error generating arm-elf-gcc
> > Alessandro Pinto wrote:
> >
> > Hi,
> > I'm a new subscriber t othis mailing list.
> > I have been trying to compile gcc for an ARM target but the compilation
> > always terminates with the following error:
> >
> > C:\TEMP/cc0W0s1B.s: Assembler messages:
> > C:\TEMP/cc0W0s1B.s:2: Error: Rest of line ignored. First ignored
> > character is `@'.
> > C:\TEMP/cc0W0s1B.s:3: Error: Rest of line ignored. First ignored
> > character is `@'.
> > C:\TEMP/cc0W0s1B.s:72: Error: no such 386 instruction: `dividend .req
r0'
> [snip]
>
> The most likely cause is that you did not specify the same prefix and
> exec-prefix when you configured binutils as when you configured gcc. It is
> also wise to put the bin subdirectory of the exec-prefix location into
your
> PATH.
>
> Jifl
> --
> Red Hat, 35 Cambridge Place, Cambridge, UK. CB2 1NS Tel: +44 (1223)
728762
> "Plan to be spontaneous tomorrow." || These opinions are all my own
fault
make.out
configure.out