This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Serial Speed with i386 PC target
- To: Fabrice Gautier <Fabrice_Gautier at sdesigns dot com>
- Subject: Re: [ECOS] Serial Speed with i386 PC target
- From: Jonathan Larmour <jlarmour at redhat dot co dot uk>
- Date: Sat, 29 Jul 2000 02:04:39 +0100
- CC: "Ecos-List \(E-mail\)" <ecos-discuss at sourceware dot cygnus dot com>
- Organization: Red Hat UK Ltd.
- References: <21DDE8E5343ED411840A00A0CC33402010480B@EXCHANGE5_5>
Fabrice Gautier wrote:
>
> In the ARM PID board target it is possible to choose the serial port speed.
> I'm loking for the same thing for th i386 PC Target.
> And can't find it. If as with the PID board, should be somewhere in "eCos
> HAL"-"i386 architecture"-"i386 PC target"
> I can choose the serial line (or screen) to be used as diag output, but
> can't choose the serial peed.
>
> It seems this is 38400 by default.
Not for the PC target. Instead you need to edit
hal/i386/pc/VERSION/src/hal_diag.c. Look for BAUD_LOW.
Jifl
--
Red Hat, 35 Cambridge Place, Cambridge, UK. CB2 1NS Tel: +44 (1223) 728762
"Plan to be spontaneous tomorrow." || These opinions are all my own fault