[ECOS] Run Tests in NEC VR4373

["Ling Su" <lingsu at palmmicro dot com>]

Hello,

After solved the endian problem, I began to run the test cases in NEC vr4373
board. I got following message(test1.exe), and at last the program is
timeout and exit. with this message " *** Timeout - MAX inactive time 30.0
exceeds limit of 30.0 *** 15:09:40 Run complete".

Anyone exprienced same problem ever? What specific configuration I should do
for running the tests. I just select and "NEC vr4373" default template and
Build the library and Build the tests, then run "tests".

Thanks !

Regards,
-Ling

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
(gdb) set height 0
(gdb) set remotedebug 0
Warning: command 'set remotedebug' is deprecated.
Use 'set debug remote'.

(gdb) set remotebaud 38400
(gdb) target remote com1
Remote debugging using com1
0x80003a50 in ?? ()
(gdb) load
Loading section .rom_vectors, size 0xb4 lma 0x80100000
Loading section .text, size 0xac0c lma 0x801000b4
Loading section .ctors, size 0x1c lma 0x8010acc0
Loading section .dtors, size 0xc lma 0x8010acdc
Loading section .rodata, size 0xd80 lma 0x8010ace8
Loading section .data, size 0xbb0 lma 0x8010ba70
Start address 0x801000a4 , load size 50712
Transfer rate: 27046 bits/sec, 492 bytes/write.
(gdb) break cyg_test_exit
Breakpoint 1 at 0x80104f44: file
//D/PROGRA~1/REDHAT~1/eCos/packages/infra/v1_3_1/src/tcdiag.cxx, line 116.
(gdb) break cyg_assert_fail
Function "cyg_assert_fail" not defined.
(gdb) break cyg_test_init
Breakpoint 2 at 0x80104e2c: file
//D/PROGRA~1/REDHAT~1/eCos/packages/infra/v1_3_1/src/tcdiag.cxx, line 62.
(gdb) cont
Continuing.

*** Timeout - MAX inactive time 30.0 exceeds limit of 30.0
*** 15:09:40 Run complete
----------------------------------------------------------------------------
----------