This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]

What's wrong the breakpoint( ) of the cyg_start( ) into the stubrom.c file?

To: <ecos-discuss at sources dot redhat dot com>
Subject: [ECOS] What's wrong the breakpoint( ) of the cyg_start( ) into the stubrom.c file?
From: =?ks_c_5601-1987?B?wOW/+Mij?= <whjang at acrowave dot com>
Date: Thu, 24 Aug 2000 11:32:49 +0900

I did make the GDB stub rom binary file without the memory change,but have some problem.
When power on the MBX, follow the displaying

===========================
YInit device '/dev/ttydiag'
Init tty channel: 3628
Init device '/dev/haldiag'
HAL/diag SERIAL init
++$T0540:fe0061e8;01:00004664;#2b

===========================
I guess the problem point is the breakpoint( ) of the cyg_start( ) into the stubrom.c file
What's wrong?

Thank you.

Follow-Ups:
- Re: What's wrong the breakpoint( ) of the cyg_start( ) into the stubrom.c file?
  - From: Jonathan Larmour

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]