ecos-discuss archive
thread index for October, 2000
This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Messages are ordered newest-to-oldest in this index. The newest
threads will be at the top of this page, the oldest will be at the bottom.
Within a single thread, the first mail note is the START of the thread;
the notes following that are in the chronological order of when they
were received. So globally, newest messages are at the top, but within
a thread, the oldest (the start of the thread) is at the top.
If you think about it, it is confusing. Just go with the flow and
everything will be all right.
- RE: Bug in i386 interrupt handler,
Fabrice Gautier
- RE: Strange step behaviour,
Fabrice Gautier
- Bug in i386 interrupt handler,
Phil Hinton
- Re: Port eCos to 80188 or 80c51,
Jonathan Larmour
- RE: Modifying memory layout, possible?,
Andreas.Karlsson
- Modifying memory layout, possible?,
Andreas.Karlsson
- Routing Tables,
Abhishek Sharad
- Porting to Atmel AT91 (Hello Carl, hello Shaun),
Andreas Bürgel
- porting to Atmel-AT91, stub memory-layout ...,
Siegfried Schaefer
- Variable size Message boxes,
Rajendran, Balakumaran (CTS)
- How to connect GDB with Redboot,
ness
- about linux synthetic target,
yyl
- Strange step behaviour,
Fabrice Gautier
- RE: CVS updates announcement ?,
Fabrice Gautier
- RE: goAhead not going ahead...,
Doug Fraser
- setting up RAM on AEB,
Andreas.Karlsson
- goAhead not going ahead...,
Colin Ford
- Port to 68k?,
profesor
- GoAhead not going ahead....,
Colin Ford
- RE: RE: porting to Atmel-AT91, stub memory-layout, .bss does,
Andreas Bürgel
- porting to Atmel-AT91, stub memory-layout, .bss does not fit,
Andreas Bürgel
- Can NOT build tests,
David Geng
- start address,
zsz
- about ram file system and memory management on the cvs,
yyl
- What differences are between ARM AEB and ARM PID?,
zsz
- Problem with Anonymous CVS Access,
Jason Lin
- How to boot eCos from FADS860 board...,
Houcheng
- Re: How do I manually clear wakeup_event.chan?,
AshCan
- CVS updates announcement ?,
Fabrice Gautier
- How to make a Interrupt driven serial port driver?,
Ling Su
- How do I manually clear wakeup_event.chan?,
AshCan
- RE: pci on i386 target already there?,
Fabrice Gautier
- pci on i386 target already there?,
Matthias Wiegand
- Some patches,
Fabrice Gautier
- LX4180,
Xavier Wang
- Can I build ARM eCos and i386 eCos on the same machine?,
David Geng
- config for ARM PID Board connection,
jjkang
- RE: Ctrl-C/Break with RedBoot, GDB and TCP,
Fabrice Gautier
- Automated Testing,
Janet Lomas
- short reads on serial port..,
Dave Airlie
- GDB stub,
Rafael Rodríguez Velilla
- arm-elf-gdb(Insight5.0) start error,
David Geng
- connection procedure for ARM PID board,
jjkang
- some basic questions about porting uclinux,
zsz
- Problem about redboot,
ness
- RE: GoAhead Web Server,
amassa@cts.com
- GoAhead Web Server,
amassa@cts.com
- Announce - ROMFS (Generic), Touch Screen (Assabet),
richard.panton
- code to keep you on your toes..,
Dave Airlie
- Ctrl-C/Break with RedBoot, GDB and TCP,
Fabrice Gautier
- RE: Re: Networking Help,
Fabrice Gautier
- about interrupts nesting and vector number decoding,
yyl
- CR's in build tree under Cygwin?,
Grant Edwards
- RE: GDB connection via TCP - solved...,
Fabrice Gautier
- Test Serial Port 2 on NEC vrc4373 target.,
Ling Su
- Networking Help,
amassa@cts.com
- application to demo wierdness,
Dave Airlie
- [porting] how to set up the memory layout of evaluator 7T ?,
Edward,Yan-Chi,Lin
- follow up on UITRON wierdness..,
Dave Airlie
- RE: GDB connection via TCP,
Fabrice Gautier
- GDB connection via TCP,
Fabrice Gautier
- New/delete operator's?,
Boris V. Guzhov
- Network Stack,
amassa@cts.com
- UITRON/threads wierdness or silliness..,
Dave Airlie
- SMC2 serial driver....problems!?!,
Daniel Lind
- ARM tools CD,
Dave Airlie
- would you please help me?,
aidj
- Linking Problem i386 target,
Christian Plessl
- Re: Difference between CTRLC & BREAK support on GDB stubs --- Solved.,
Rosimildo daSilva
- RE: Redboot and tcp/ip stack,
Fabrice Gautier
- Redboot and tcp/ip stack,
Fabrice Gautier
- TCP/IP 1.3.1 connect() never returns,
AshCan
- RE: Debugging net stack.,
Fabrice Gautier
- missing include files,
Dave Airlie
- Patch for io//serial/current/src/common/serial.c,
Dave Airlie
- ks32c50100 and ecos,
Rickhard Mattsson
- $B#N#P#O7]G=J!;c2;3ZJ82=;v6H6(2q(B
$B!V@83h%W%i%9(B
2$B$N2q!W(B
,
NPO
- Debugging SIGTRAP Errors,
Selvakumar Manickam
- RE: Where is my stack ?! (for my i386),
Fabrice Gautier
- Where is my stack ?! (for my i386),
Fabrice Gautier
- Gdb stub packet meaning,
Chandrasekhar G
- System crashes when executed from ROM,
Chandrasekhar G
- RE: Breakpoint problem,
Andreas.Karlsson
- Breakpoint problem,
Andreas.Karlsson
- Installing the eCos monitor boot floppy,
Leandro Vieira
- RE: AEB-1 RAM extendable?,
Andreas.Karlsson
- RE: Redboot and builtin functions,
Fabrice Gautier
- RE: Installing the eCos Monitor Boot Floppy,
Fabrice Gautier
- RE: Redboot cdl patch.,
Fabrice Gautier
- RE: Ethernet driver: alignment warning,
Fabrice Gautier
- Re: Build problem,
Jonathan Larmour
- Build Problem,
amassa@cts.com
- Redboot and builtin functions,
Fabrice Gautier
- Ethernet driver: alignment warning,
Christian Plessl
- AEB-1 RAM extendable?,
Andreas.Karlsson
- Re: Recent ARM Boards,
Fano Ramparany
- $BAG:`%G!<%?#1K|E@!zL5NA%@%&%s%m!<%I%5%$%HEP>l!*(B
,
DATA-STATION.COM
- Interrupt and IO-device driver,
Daniel Lind
- Redboot cdl patch.,
Fabrice Gautier
- Recent ARM Boards,
shcho
- interrupt_end,
Fabrice Gautier
- RE: Redboot, TFTP and GDB...,
Fabrice Gautier
- Motorola MTX604 Support?,
Bernd Carsten Sander
- eth-driver fails in ROM-build,
Jasper Goseling
- EPI's ICE + gcc,
Xavier Wang
- ecos for Unix,
Suet Fei Li
- Question on Support for AEB 2,
Narayanan, Anita (CTS)
- $B<:Ni$$$?$7$^$9(B
,
$BM}7C;R(B
- Re: Difference between CTRLC & BREAK support on GDB stubs,
Rosimildo daSilva
- Ethernet dsr and Redboot,
Fabrice Gautier
- Redboot, TFTP and GDB...,
Fabrice Gautier
- TCP/IP support for synthetic Linux target,
Dan Jakubiec
- ECOS Building tools under Linux 6.2,
Leandro Vieira
- Difference between CTRLC & BREAK support on GDB stubs,
Rosimildo daSilva
- Re: Insight 5.0( gdb )fails under Win98,
Rosimildo daSilva
- i386 FPU (was: RE: need help getting started with eCos for Intel 386EX!!),
Fabrice Gautier
- Insight 5.0( gdb )fails under Win98,
Rosimildo daSilva
- need help getting started with eCos for Intel 386EX!!,
mkruger
- RE: Redboot build.,
Fabrice Gautier
- Redboot with static IP,
Fabrice Gautier
- How to include completed serial port support in default template for vrc4373 platform.,
Ling Su
- Redboot build.,
Fabrice Gautier
- Hitachi SH7709 Serial drivers,
Peter Graf
- gcc build problems,
Johan Almquist
- Re: Help about apply patch file(ecos-gcc-2952.pat) to gcc-2.95.2,
Christian Plessl
- Help about apply patch file(ecos-gcc-2952.pat) to gcc-2.95.2,
Leandro Vieira
- Support for 16 bit microcontrollers/-processors ?,
Huber, Matthias 6667 SFA-31
- apply patch file Problem,
Leandro Vieira
- RE: hal_vsr_table for i386.,
Fabrice Gautier
- porting to tensilica xtensa processor,
Suet Fei Li
- hal_vsr_table for i386.,
Fabrice Gautier
- Double initialize_stub,
Fabrice Gautier
- RE: Virtual Vector Table.,
Fabrice Gautier
- 8260 porting.,
Suresh N
- RE: context switching in ecos,
Jesper Skov
- Virtual Vector Table.,
Fabrice Gautier
- CVS,
amassa@cts.com
- RE: Debugging via Ethernet. (on i386 platform),
Fabrice Gautier
- Re: creating components,
Bart Veer
- Problems allocating memory in main(),
Andreas Bürgel
- Config for Final ROM image,
shcho
- context switching in ecos,
Suet Fei Li
- Debugging via Ethernet. (on i386 platform),
Fabrice Gautier
- HOWTO Crash the configuration tool (with win NT),
Fabrice Gautier
- Static constuctors,
Boris V. Guzhov
- TCP/IP with 'Routing' enabled: Problem in building,
Selvakumar Manickam
- problem configuring/building ecos,
Mike MacMillan
- Re: About Flags,
Hugo Tyson
- problems building Linux synthetic target,
mahesh revuri
- Re: about Per Thread Data,
Nick Garnett
- MBX860, adding some IO-device,
Daniel Lind
- i386 architecture,
D.S.Phani Kumar
- cyg_pci_configure_device and active PCI devices,
Fabrice Gautier
- RE: How to build test separately.,
Fabrice Gautier
- Pseudo serial driver for Linux synthetic target?,
Chris Houston
- GDB Download on i386 target hangs,
Christian Plessl
Re: cvs snapshot with net by ftp?,
Michael Barker
looking for eCos Training program...,
Fano Ramparany
Debugging net stack.,
Fabrice Gautier
How to build test separately.,
Fabrice Gautier
cvs snapshot with net by ftp?,
Michael Barker
MBX860(40MHz) stubs with cvs snapshot - mapping problem?,
Michael Barker
debugging with EP7211,
danish iftikhar
RE: Re: Port of 82559 ethernet driver for PC target (was: "RE: New bie Question!"),
Fabrice Gautier
Information and Help,
Leandro Vieira
MBX860 super I/O chip,
Daniel Lind
Port of 82559 ethernet driver for PC target (was: "RE: Newbie Question!"),
Fabrice Gautier
Unresolvable conflict,
Fabrice Gautier
PCI on i386 PC.,
Fabrice Gautier
Port to MIPS II, IDT-79RC32334,
Tim Michals
Interrupts In MIPS....?,
Colin Ford
ARM Multi-ICE support status,
Robert Cragie
CS8900A driver,
Jurica Baricevic
re: question about redboot,
Gary Thomas
tools on windows 2000,
Rafael Rodríguez Velilla
Impossible question ;),
Richard Kinder
RE: Problems building stand-alone gdb stub for ARM AEB bo,
Gary Thomas
EDB7xxx ROM image - MMU sets ROM noncacheable,
AshCan
Re: cygwin arm-elf toolset binaries available,
Grant Edwards
Stack base in new threads on current CVS,
Juancho Andrés Sáez
Re: regarding EP7211,
AshCan
regarding EP7211,
danish iftikhar
Need help for an embedded board,
A M
Mail converted by MHonArc
2.4.6