This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: ARM Assembler problem
- To: ecos-discuss at sourceware dot cygnus dot com
- Subject: [ECOS] RE: ARM Assembler problem
- From: Andreas Bürgel <ab at genologic dot de>
- Date: Tue, 28 Nov 2000 17:46:24 +0100
- Organization: GenoLogic GmbH, Dortmund
> As you can see the assembler computed a wrong target address (opcode
> 1afffffe at address 38). The offset should be -2 resulting in an
Sorry, the offset is -4, of course (and I should use "instruction word"
instead "opcode", I know).
I use binutils version 2.10.