This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
ROM startup on EBD7212
- To: ecos-discuss at sources dot redhat dot com
- Subject: [ECOS] ROM startup on EBD7212
- From: "Lewin A.R.W. Edwards" <larwe at larwe dot com>
- Date: Thu, 01 Feb 2001 17:55:59 -0500
I am finally trying to get a flash-bootable version of my OS for a
standalone demo for an upcoming trade show. I can't be loading this from a
PC; I need to be able to just turn on the board and have it boot.
Here's what I did:
I set the startup type to ROM.
I changed nothing else in the .ecc; I rebuilt the library, and then built
my application.
objcopy -O binary bios3.exe bios3.bin
I used the download program to flash that BIN into the board.
Power the board up (after removing the flash-boot jumper) - nothing.
What else do I need to do to make a ROM-bootable application with eCos 1.3.1?
=== Lewin A.R.W. Edwards (Embedded Engineer)
Work: http://www.digi-frame.com/
Personal: http://www.zws.com/ and http://www.larwe.com/
"Und setzet ihr nicht das Leben ein,
Nie wird euch das Leben gewonnen sein."