This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: Problem downloading eCos
- To: larwe at larwe dot com
- Subject: RE: [ECOS] Problem downloading eCos
- From: Daniel dot Andersson at combitechsystems dot com
- Date: Wed, 21 Mar 2001 15:04:27 +0100
- Cc: ecos-discuss at sourceware dot cygnus dot com
Hi,
Since eCos isnīt supported then i donīt have any other options than porting
it because in my project we must use the AT91R40807 processor. And i would
be very greatful if i could use you as a panel in some porting issues.
Is the EB01 eCos port stable at the moment? Can i use it and make the
appropriate changes to suite the EB40 or should i start from some other
source?
By the way, do you have a working "hello world"-example for the EB40 board
(without eCos). Just so a can get my board running.
/Daniel Andersson
> -----Original Message-----
> From: Lewin A.R.W. Edwards [mailto:larwe@larwe.com]
> Sent: den 21 mars 2001 14:54
> To: Andersson Daniel; jlarmour@redhat.com
> Cc: ecos-discuss@sourceware.cygnus.com
> Subject: RE: [ECOS] Problem downloading eCos
>
>
> Hi Daniel,
>
> >Yes, the board is an AT91 evaluation board from ATMEL with
> an EB40 mounted
> >on it. The precessor is an AT91R40807. However, i thought
> that the option
> >ARM PID in the eCos configuration tool covered several of
> the ARM boards. Do
>
> The EB40 isn't supported right now. However, if you want to
> work on a port
> for this board, I would be most interested in pooling resources (as a
> personal project, not for my work).
>
> === Lewin A.R.W. Edwards (Embedded Engineer)
> Work: http://www.digi-frame.com/
> Personal: http://www.zws.com/ and http://www.larwe.com/
>
> "Und setzet ihr nicht das Leben ein,
> Nie wird euch das Leben gewonnen sein."
>