This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RedBoot: '-v' option causes checksum failure when loading via TFTP?
- To: ecos-discuss at sources dot redhat dot com
- Subject: [ECOS] RedBoot: '-v' option causes checksum failure when loading via TFTP?
- From: Grant Edwards <grante at visi dot com>
- Date: Mon, 14 May 2001 10:44:56 -0500
My (somewhat modified) version of RedBoot has a problem with a
TFTP load using the '-v' option via telnet. If you telnet in
to the box and to a 'load -v -h 1.2.3.4 filename' you get an
S-Record checksum failure at a certain point in the file (it's
always the same address, but the failure value varies). The
load without the '-v' works fine, as does the same command with
the '-v' isssued from a serial console port.
This is probably caused by one of my changes, but I thought I'd
ask if anybody else had seen this problem.
--
Grant Edwards
grante@visi.com