This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]

Re: EDB7211-2 downloading in Win2k


I figured that's what it was doing, and why it crashed. 

----- Original Message ----- 
From: "Dan Conti" <danc@iobjects.com>
To: <ecos-discuss@sourceware.cygnus.com>
Sent: Monday, June 04, 2001 3:45 PM
Subject: RE: [ECOS] EDB7211-2 downloading in Win2k


it's in the hal/arm/edb7xxx/.../support directory
porting it to cygwin is pretty trivial. it also runs fine under win2k.

the cirrus download.exe program only runs on win95 and win98, and
crashes on win2k because it tries to directly access the serial port.

-Dan

> -----Original Message-----
> From: Trenton D. Adams [mailto:trenton_adams@hotmail.com]
> Sent: Monday, June 04, 2001 2:34 PM
> To: Gary Thomas
> Cc: ecos-discuss@sourceware.cygnus.com
> Subject: Re: [ECOS] EDB7211-2 downloading in Win2k
> 
> 
> That would be good if I could get a hold of that.  Where 
> would I get this
> Linux one?
> 
> ----- Original Message -----
> From: "Gary Thomas" <gthomas@cambridge.redhat.com>
> To: "Trenton D. Adams" <trenton_adams@hotmail.com>
> Cc: <ecos-discuss@sourceware.cygnus.com>
> Sent: Monday, June 04, 2001 3:32 PM
> Subject: RE: [ECOS] EDB7211-2 downloading in Win2k
> 
> 
> >
> > On 04-Jun-2001 Trenton D. Adams wrote:
> > > This isn't a specific question to eCos or RedBoot, and I 
> apologize for
> that.
> > > I can't seem to find any other resources on the net that 
> might have the
> > > required information.
> > >
> > > I haven't been able to test the download.exe program with 
> the board
> hooked
> > > up yet because I don't have access to it at the moment. 
> However, I have
> ran
> > > the download.exe program with the correct parameters, and 
> it simply
> crashes.
> > > Is this normal on Windows 2000/NT? Is there a different 
> download program
> for
> > > these versions of windows? If so, where can I get it? If 
> not, would this
> > > happen just because the board isn't hooked up?
> > >
> >
> > We don't have anything to do with that program, sorry.  
> Have you tried
> asking
> > Cirrus Logic about your problems?
> >
> > > I'm trying to figure out how to get RedBoot and eCos 
> running before
> actually
> > > having access to the EDB7211-2 board, and this would 
> obviously be the
> first
> > > step.
> > > I'm sorry if there is already an answer in the archives, 
> but I couldn't
> find
> > > it.
> >
> > We do have an equivalent program which was created under 
> Linux.  I've not
> tried,
> > but you can probably get it to work via CygWin instead of 
> using the Cirrus
> > program.
> >
> 


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]