This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
ebsa285 initial redboot installation problem
- To: ecos-discuss at sources dot redhat dot com
- Subject: [ECOS] ebsa285 initial redboot installation problem
- From: "Michael K. Link" <linkmk at anubis dot network dot com>
- Date: Wed, 6 Jun 2001 16:10:52 -0500 (CDT)
I am using the latest src from cvs and currently I have a gdb stubs ROM
loaded into flash that I built from scratch. I was able to successfully
run the packages/hal/arm/ebsa285/current/tests/sdram0.cxx to verify
everything was working correctly. I run redboot from RAM with gdb stubs
and detach and quit from gdb then fire up minicom and type the string
"$c#63" the only output I receive is "++", and nothing happens after this.
I verified that the settings are set for 38400 N81 no flow. I am using
the RAM image from packages/hal/arm/ebsa285/current/images. Any insight
on what the problem might be would be helpful.
I have also tried burning the supplied ROM image into flash directly, but
the only output I get from that is a single "+".
--
Mike