This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: Simple serial program
- To: "'Jonathan Larmour'" <jlarmour at redhat dot com>
- Subject: RE: [ECOS] Simple serial program
- From: "Trenton D. Adams" <tadams at extremeeng dot com>
- Date: Tue, 12 Jun 2001 15:40:26 -0600
- Cc: "'eCos'" <ecos-discuss at sources dot redhat dot com>
- Organization: Extreme Engineering
Ok, I enabled ROM support in the eCos kernel and recompiled it. I
assume this is what I was supposed to do.
I then recompiled and linked the serial.c example, and stripped it. I
then proceeded to download it to the board. It still doesn't write to
the serial port. Anything else I'm missing?
I do have the serial drivers enabled!
-----Original Message-----
From: jlarmour@cambridge.redhat.com
[mailto:jlarmour@cambridge.redhat.com] On Behalf Of Jonathan Larmour
Sent: Tuesday, June 12, 2001 2:22 PM
To: Trenton D. Adams
Cc: 'eCos'
Subject: Re: [ECOS] Simple serial program
"Trenton D. Adams" wrote:
>
> Ok, thanks. I'll try it both with RedBoot, and from ROM on it's own.
> I need to know that it's working. However, I can't find anywhere in
> the eCos documentation or build tool documentation on how to select
> the type of program, RAM or ROM!
The option is CYG_HAL_STARTUP and can be found in the platform HAL, i.e.
the edb7xxx HAL.
Jifl
--
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223)
271062 Maybe this world is another planet's Hell -Aldous Huxley ||
Opinions==mine Come to the Red Hat TechWorld open source conference in
Brussels!
Keynotes, techie talks and exhibitions
http://www.redhat-techworld.com/