This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]

Re: upload using xmodem, ymodem

To: Gary Thomas <gthomas at cambridge dot redhat dot com>
Subject: Re: [ECOS] upload using xmodem, ymodem
From: Christoph Csebits <Christoph dot Csebits at frequentis dot com>
Date: Wed, 13 Jun 2001 12:51:27 +0200
Cc: ecos-discuss at sources dot redhat dot com
References: <20010612173313.A25627@frequentis.com> <XFMail.20010612104108.gthomas@cambridge.redhat.com>

On Tue, Jun 12, 2001 at 10:41:08AM -0600, Gary Thomas wrote:
> 
> I use this script for 'minicom' on Linux.  It sends a binary file
> to RedBoot.  If you want to send .srec file, just leave out the
> "-b" and "-r" options.  In 'minicom' the script is activated via ^A-G

Thank you for your script. Using it results in
the following.

RedBoot>  
** Error: Illegal command: " "
RedBoot>Sending upload, 674 blocks: Give your local XMODEM receive command now.
Xmodem sectors/kbytes sent:   0/ 0kRetry 0: Got 24 for sector ACK
                                                                 Retry 0: Got 24 for sector ACK

Is there a conflict using one serial line for sending
redboot commands with reading the results and also
trying to upload a file?

best regards, christoph

Follow-Ups:
- Re: upload using xmodem, ymodem
  - From: Gary Thomas

References:
- upload using xmodem, ymodem
  - From: Christoph Csebits
- RE: upload using xmodem, ymodem
  - From: Gary Thomas

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]