RE: [ECOS] NASTY bug in eCos ConfigTool 1.3.1.2 Win32

["Trenton D. Adams" <tadams at extremeeng dot com>]

Ok, I'm starting out with a project that has already been saved.

Now I change from RAM to ROM, or the other way around.

Now you know the little '*' that usually appears to indicate you've made
a change?  Well, it doesn't appear.  If I click on save anyhow and then
exit, and come back in, the RAM/ROM option I changed is back to the way
it was before the change.  If I don't click on Save but I do exit, it
asks me if I want to save.  If I select yes, then the option is actually
saved, and is there when I come back in.  I have also tried going
"File|Save As" and selecting the same filename, but that doesn't work
either.

Understood?

-----Original Message-----
From: Julian Smart [mailto:julians@redhat.com] 
Sent: Wednesday, June 13, 2001 7:10 AM
To: Trenton D. Adams
Cc: eCos
Subject: RE: [ECOS] NASTY bug in eCos ConfigTool 1.3.1.2 Win32


At 06:13 AM 6/13/01 -0600, Gary Thomas wrote:

>On 12-Jun-2001 Trenton D. Adams wrote:
> > I have two separate configs.  The are identical except one is RAM, 
> > and the other is ROM support for the kernel.  If I change from ROM 
> > to RAM support, it doesn't allow me to save the new configuration 
> > under the current project.  I have to select File|Exit in order for 
> > it to ask me to save and then it will finally acutally save it.  
> > This caused me to

Do you think you could list the steps involved? I'm not sure I
understand 
what you mean by not allowing you to save it.

Thanks,

Julian

--
Red Hat UK Ltd, Unit 200 Rustat House, 62 Clifton Road, Cambridge, UK.
CB1 
7EG Tel: +44 (1223) 271063