This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: Rebuilding RedBoot for EDB7212
- To: Stefano Costa <stefano dot costa at bluewind dot it>
- Subject: RE: [ECOS] Rebuilding RedBoot for EDB7212
- From: Gary Thomas <gthomas at cambridge dot redhat dot com>
- Date: Thu, 14 Jun 2001 04:26:01 -0600 (MDT)
- Cc: ecos-discuss at sourceware dot cygnus dot com
- Organization: Red Hat, Inc.
On 14-Jun-2001 Stefano Costa wrote:
> Hi,
>
> I'm using the RedBoot ROM image found in the latest CVS
> repository for eCOS on a EDB7212 board with good success (I'm
> able to connnect Insight to its Ethernet port, debug, download
> applications to RAM with serial line, Great!). The I tryed to rebuild
> the same RedBoot starting from the latest repository (I donwloaded
> eCOS and NET support), choosing the "redboot" template for
> EP7xxx. Flashing the image that I get with this build, it seems that
> RedBoot is only able to connect with serial line and download an
> application to RAM, but it has no Ethernet and FLASH support
> even if the related checkboxes are highlighted in the ConfigTool.
> Did anyone face the same problem?
That's because you didn't include the drivers for any of these devices.
Follow the instructions in the RedBoot manual for rebuilding:
% ecosconfig new edb7212 redboot
% ecosconfig import ${ECOS_REPOSITORY}/hal/arm/edb7xxx/current/misc/edb7212_redboot_ROM.ecm
% ecosconfig tree
% make