This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: ARM Development with multi-ice from South Africa
- To: rob dot wj dot jansen at philips dot com
- Subject: Re: [ECOS] ARM Development with multi-ice from South Africa
- From: Grant Edwards <grante at visi dot com>
- Date: Thu, 21 Jun 2001 11:31:44 -0500
- Cc: Jason at roninwireless dot com, ecos-discuss at sources dot redhat dot com
- References: <0056890032949220000002L902*@MHS>
On Thu, Jun 21, 2001 at 02:18:22PM +0200, rob.wj.jansen@philips.com wrote:
> Jifl wrote:
>
> > Try searching the ecos-discuss mail archives for the Jeeni.
> > Grant Edwards has had success with that using the CVS version
> > of GDB and Angel. Also I believe the embeddedICE (precursor to
> > the Multi-ICE) may be usable too, but I'm not sure.
Yes, EmbeddedICE works with the latest gdb. If you hook up
serial-only, you'll get pretty bored waiting for downloads to
finish (it only runs at 9600 or 19200). If you hook up
parallel/serial, then it's quite usable.
If I had a choice, I'd opt for the Jeeni over EmbeddedICE.
> We are using the Jeeni and it works great. It even accepts our
> CPU clock switching (from 32 kHz to 13 MHz). GDB worked right
> out of the box (using target rdi E=nameofmydevice).
>
> Remember to use "set rdiromatzero 1" if you do not want GDB to
> overwrite your interrupt table.
--
Grant Edwards
grante@visi.com