RE: [ECOS] Enable EDB7xxx interrupts

["Trenton D. Adams" <tadams at extremeeng dot com>]

Oops, I forgot to mention that I've set bit 5 in the INTMR1.

> -----Original Message-----
> From: Lewin A.R.W. Edwards [mailto:larwe@larwe.com] 
> Sent: Monday, June 25, 2001 10:40 AM
> To: Trenton D. Adams; 'eCos discussion'
> Subject: Re: [ECOS] Enable EDB7xxx interrupts
> 
> 
> 
> >I'm testing interrupts with the CL-PS6700 PCMCIA controller 
> and I need 
> >to know something about the EDB7xxx interrupts.  Is there 
> something I 
> >have to do enable interrupts on the EDB7xxx?  I'm asking 
> because I can 
> >get the interrupts on the CL-PS6700 to activate, but the 
> corresponding 
> >bits for EINT1 or EXTFIQ in INTSR1 are not activated with it.
> 
> Check the interrupt mask registers.
> 
> 
> -- Lewin A.R.W. Edwards
> Embedded Engineer, Digi-Frame Inc.
> Work: http://www.digi-frame.com/
> Tel (914) 937-4090 9am-6:30pm M-F ET
> Personal: http://www.larwe.com/ http://www.zws.com/
> 
> "Far better it is to dare mighty things, to win glorious 
> triumphs, even 
> though checkered by failure, than to rank with those poor spirits who 
> neither enjoy much nor suffer much, because they live in the 
> gray twilight 
> that knows not victory nor defeat."
> (Theodore Roosevelt)
> 
>