Re: [ECOS] a couple of questions from a rookie... :o/

[ANDRE Sébastien <sebastien dot andre at sxb dot bsf dot alcatel dot fr>]

Hello,

I'm in the same case like you , i have'nt experience with embedded systems et
with systems ports !
so if you don't find a port of eCos for your board you will need like me to
port it for your board !!!
Maybe you will have more chance than me because your board is a defined board
!! me it's a custom board !! grrrrr :-))

So my mail don't help you !! but search if an existing port for your board
exist !!
if it's the case, it will bo more easily for you !!


best regards,
Sébastien (try to see how port eCos for his board) :-)


Arif.Abbas@combitechsystems.com wrote:

> Hi everyone!
>
> The questions I want to ask may seem a bit stupid to you guys if you are a
> bit experienced.
> But the thing is that I am working on my thesis project, an this is the
> first glimpse of
> "real life beyond course literature" for me... :o)
> Anyway, I've got the eCos config tool and gdb environment running ok. I have
> also built
> a lib for eCos1.3.1 for Intel EBSA285 StrongARM board and everything seems
> fine. But the
> thing is that I am not using that hardware. The one I am using is not
> represented in the list
> of supported types...I am using a target called mediaEngine from Brightstar
> Engineering.
> My question is where do I get the "correct" eCos files for it? As far as I
> understood, you can
> (or should) use the CVS repository...But HOW to use it is another Q....
> Has ANYONE here worked with the above mention platform (mediaEngine from
> BSE) and eCos?
>
> I hope that someone has time to help me. Thanks in advance!!
>
> Best regards
> Arif