This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]

RE: Re:problems creating GDB-stub (redboot) and getting eCos running on hardware



But it has to be an error msg, since the prompt "freezes"...
We can't type anything...
At least that's what I thought.

How do I use the "fis" command? 
(what is it and how do I use it when the prompt is frozen?)

/Arif

-----Original Message-----
From: Weilong Li [mailto:weilongli2000@yahoo.com]
Sent: den 27 juni 2001 10:37
To: ecos-discuss@sources.redhat.com
Subject: [ECOS] Re:problems creating GDB-stub (redboot) and getting eCos
running on hardware



>#FLASH: 0x50000000 - 0x50400000, 64 blocks of
>0x00010000 bytes each.
>FLASH configuration checksum error or invalid key

This is not error message. It means it is successful.
The checksum error or invalid key only means
you might need to initialize your flash using fis
command.

Weilong

__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]