This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
network test problem on ipaq
- To: ecos-discuss at sourceware dot cygnus dot com
- Subject: [ECOS] network test problem on ipaq
- From: Weilong Li <weilongli2000 at yahoo dot com>
- Date: Sun, 1 Jul 2001 03:07:16 -0700 (PDT)
I try to run tcp_echo, tcp_source and tcp_sink
program on ipaq.
>From linux host, I used serial port to connect
ipaq, then I used gdb to remotely run tcp_echo, after
tcp_echo is running, and I run tcp_source and
tcp_sink, but I got "no route to host" message.
And I cannot ping ipaq.
While before I run tcp_echo, I can ping ipaq, and
tcp_source and tcp_sink can successfully run and
waiting for packets. But I cannot run tcp_echo
through gdb, it simply cannot load the program.
So it seems there are conflicts even I used
serial port to run tcp_echo, and used
ethernet interface to run tcp_sink and
tcp_source. Please help.
thanks,
Weilong
__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/