This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: network test problem on ipaq
- To: Jonathan Larmour <jlarmour at redhat dot com>
- Subject: Re: [ECOS] network test problem on ipaq
- From: Weilong Li <weilongli2000 at yahoo dot com>
- Date: Mon, 2 Jul 2001 12:02:23 -0700 (PDT)
- Cc: ecos-discuss at sourceware dot cygnus dot com
I also tried running tcp_echo before, after
tcp_echo is running, I cannot ping ipaq,
so tcp_source and tcp_sink will always
return "no route to host" error message.
The ip address of ipaq I'm talking about
is assigned by running a dhcp server on linux host,
then upon redboot boots, it will detect the
socket communication ethernet card, and then
assign the ip address. So in this sense,
I think the ip address is redboot's ip address.
I don't know how the ip address of ecos is assigned,
can you elaborate on this ?
thank you so much,
Weilong
>
> Firstly, are you making sure that tcp_echo is
> running _before_ starting
> tcp_sink and tcp_source? Secondly when you talk
> about the IP address of the
> ipaq, there are two to consider: RedBoot's and
> eCos's. Their addresses
> should not be the same. The latter one is the
> relevant one for the net
> test.
>
> Jifl
> --
> Red Hat, Rustat House, Clifton Road, Cambridge, UK.
> Tel: +44 (1223) 271062
> Maybe this world is another planet's Hell -Aldous
> Huxley || Opinions==mine
> Come to the Red Hat TechWorld open source conference
> in Brussels!
> Keynotes, techie talks and exhibitions
http://www.redhat-techworld.com/
__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/