This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Re:Re: regarding build redboot
- To: nagendra dot em at eudoramail dot com, ecos-discuss at sourceware dot cygnus dot com, ecos-discuss at sourceware dot cygnus dot com, "tpoper" <tpoper at 263 dot net>
- Subject: Re: Re:Re:[ECOS] regarding build redboot
- From: "Nagendra EM" <nagendra dot em at eudoramail dot com>
- Date: Tue, 03 Jul 2001 13:00:45 +0530
- Cc: ecos-discuss at sources dot redhat dot com
- Organization: QUALCOMM Eudora Web-Mail (http://www.eudoramail.com:80)
- Reply-To: nagendra dot em at eudoramail dot com
Hi,
No, even if you get the ......., I feel you need to have same baud rate set on both the host and the target, otherwise you may not be able to get the proper(desired) output.
regards,
- Nagendra.
--
On Tue, 3 Jul 2001 15:21:12 tpoper wrote:
>Hi :
> But the redboot can printf a line of '........................' on the screen,if the baut is incrrect it can't handle this!
>
>Thanx,for your advice!
> yours.
> T.poper
>
>>Hi all:
>> I just built redboot on cygwin&win2000 by configtool 2.02.but I can't boot my matchine by it.Can any body tell me the reasone?
>>
>>Thanx in advance!
>> T.poper
>>
>>Hi poper,
>>Just check the baut rate setting if you are using hyperterminal or any such thing as your prompt. I would suggest you to redirect it to hyperterminal, since we have faced the same problem. But be sure of the baud rate settings.
>>
>>regards,
>>- Nagendra.
>>
>>
>>
>>Join 18 million Eudora users by signing up for a free Eudora Web-Mail account at http://www.eudoramail.com
>
>_____________________________________________
>[Wc2;3v;' GaKIIOMx] IOMxW(SC:E#:95963#,SC;'C{/C\Bk#:263
>580T*BrJ}BkO`;z#,;9KM100T*A*M(IP?( http://shopping.263.net/category21.htm
>
Join 18 million Eudora users by signing up for a free Eudora Web-Mail account at http://www.eudoramail.com