This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Fw: Asynchronous GDB break serial target
- To: <ecos-discuss at sources dot redhat dot com>
- Subject: Re: [ECOS] Fw: [ECOS] Asynchronous GDB break serial target
- From: "RAY Electronic-Design GmbH" <info at raygmbh dot de>
- Date: Thu, 2 Aug 2001 12:22:41 +0100
- References: <006001c11aa7$bd4e2400$fe78a8c0@raypc2> <otae1ivr04.fsf@zoftcorp.adsl.dk>
- Reply-To: "RAY Electronic-Design GmbH" <info at raygmbh dot de>
I was fooled by the GUI configtool, where I changed some options, but
hitting F7 for build didn't recompile vector.s, where hal_ctrlc_isr_init is
called.
After deleting all *.o files in the build tree's and remaking
hal_ctrlc_isr_init was called.
Asynchronous Break now seems to work, I'll have to test further...
Raymund Hofmann
----- Original Message -----
From: "Jesper Skov" <jskov@cambridge.redhat.com>
To: "RAY Electronic-Design GmbH" <info@raygmbh.de>
Cc: <ecos-discuss@sources.redhat.com>
Sent: Thursday, August 02, 2001 8:51 AM
Subject: Re: [ECOS] Fw: [ECOS] Asynchronous GDB break serial target
> >>>>> "RAY" == RAY Electronic-Design GmbH <info@raygmbh.de> writes:
>
> >> I traced so far now, that the hal_default_isr is called, but in
> >> there is going on something i don't understand:
> >>
> >>
> >> __ #ifndef CYGSEM_HAL_ROM_MONITOR if
> >> (CYGNUM_CALL_IF_TABLE_VERSION_CALL_HACK ==
> >> (CYGACC_CALL_IF_VERSION() &
> RAY> CYGNUM_CALL_IF_TABLE_VERSION_CALL_MASK))
> >> #endif { hal_virtual_comm_table_t* __chan =
> >> CYGACC_CALL_IF_DEBUG_PROCS(); if (__chan) gdb_vector =
> >> CYGACC_COMM_IF_CONTROL(*__chan, __COMMCTL_DBG_ISR_VECTOR); } if(
> >> vector == gdb_vector ) __
> >>
> >> in there it reads the version of the virtual vector table, which is
> >> 0x18
> RAY> in
> >> my redboot build, but tries to compare it with 0x41. The Version is
> >> calculated:
>
> The version is set to 0x41 in hal_ctrlc_isr_init which is (or should
> be) called by RAM applications as they enable ctrl-c support.
>
> Jesper