This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
program doesn't work with new redboot
- To: "'eCos Disuss'" <ecos-discuss at sourceware dot cygnus dot com>
- Subject: [ECOS] program doesn't work with new redboot
- From: "Trenton D. Adams" <tadams at theone dot dnsalias dot com>
- Date: Fri, 10 Aug 2001 14:20:46 -0600
My program won't work with the new redboot I just compiled. It does the
following.
$ arm-elf-gdb.exe -nw RigSystem.exe
GNU gdb 5.0
Copyright 2000 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you
are
welcome to change it and/or distribute copies of it under certain
conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for
details.
This GDB was configured as "--host=i686-pc-cygwin --target=arm-elf"...
(gdb) set remotebaud 115200
(gdb) target remote com1
Remote debugging using com1
0xe0006630 in ?? ()
(gdb) load
Loading section .rom_vectors, size 0x40 lma 0x20000
Loading section .text, size 0x389c0 lma 0x20040
Loading section .rodata, size 0x1a1b8 lma 0x58a00
Loading section .data, size 0x1194 lma 0x72bb8
Start address 0x20040 , load size 343372
Ignoring packet error, continuing...
Transfer rate: 80793 bits/sec, 306 bytes/write.
(gdb) cont
Continuing.
Ignoring packet error, continuing...
Interrupted while waiting for the program.
Give up (and stop debugging it)? (y or n) y
(gdb)
Any ideas?
Trenton D. Adams
Extreme Engineering
#17, 6025 - 12 St. SE
Calgary, Alberta, Canada
T2H 2K1
Phone: 403 640 9494 ext-208
Fax: 403 640 9599
http://www.extremeeng.com