This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: CYGBLD_ISO_ERRNO_CODES_HEADER problem
- To: "'Jonathan Larmour'" <jlarmour at redhat dot com>
- Subject: RE: [ECOS] CYGBLD_ISO_ERRNO_CODES_HEADER problem
- From: "Trenton D. Adams" <tadams at theone dot dnsalias dot com>
- Date: Sun, 12 Aug 2001 10:32:33 -0600
- Cc: "'eCos Disuss'" <ecos-discuss at sourceware dot cygnus dot com>
No, it doesn't resolve it automagically. It says that there's no
solution for the conflict. I'm using 2.04 of the GUI tool.
I don't understand what you mean by set it to "<cyg/error/codes.h>"
If I set default_value to anything other than 0, it has an error when I
start the config tool. I assume that's because it's of flavor booldata.
cdl_component CYGPKG_ISO_ERRNO {
display "Error handling"
flavor none
no_define
cdl_interface CYGINT_ISO_ERRNO_CODES {
display "Number of implementations of error codes"
requires { 1 >= CYGINT_ISO_ERRNO_CODES }
}
cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER {
display "Error codes implementation header"
flavor booldata
default_value 0
}
cdl_interface CYGINT_ISO_ERRNO {
display "Number of implementations of errno variable"
requires { 1 >= CYGINT_ISO_ERRNO }
}
cdl_option CYGBLD_ISO_ERRNO_HEADER {
display "errno variable implementation header"
flavor booldata
default_value 0
}
}
-----Original Message-----
From: ecos-discuss-owner@sources.redhat.com
[mailto:ecos-discuss-owner@sources.redhat.com] On Behalf Of Jonathan
Larmour
Sent: August 12, 2001 9:44 AM
To: Trenton D. Adams
Cc: 'eCos Disuss'
Subject: Re: [ECOS] CYGBLD_ISO_ERRNO_CODES_HEADER problem
"Trenton D. Adams" wrote:
>
> CYGPKG_ERROR says it requires this. What is it, and how do I add it?
The inference engine should resolve this by default. Does it not? If you
are using the GUI tool, make sure you are using the latest version,
either from the CT 1 series (v1.3.1.3) or CT 2 (v2.04) as there was an
inference engine bug for earlier versions.
> I
> found it in "isoinfra\current\include\errno.h". That doesn't help me
> any though. I was looking through isoinfra.cdl and found it, but the
> display description is not listed anywhere in the windows config tool
> packages!
It is in the isoinfra CDL under "Error handling". You can just set it to
"<cyg/error/codes.h>" which is what it should be.
Jifl
--
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223)
271062 Maybe this world is another planet's Hell -Aldous Huxley ||
Opinions==mine