This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: program doesn't work with new redboot
- To: "'Jonathan Larmour'" <jlarmour at redhat dot com>
- Subject: RE: [ECOS] program doesn't work with new redboot
- From: "Trenton D. Adams" <tadams at theone dot dnsalias dot com>
- Date: Mon, 13 Aug 2001 14:12:48 -0600
- Cc: "'eCos Disuss'" <ecos-discuss at sourceware dot cygnus dot com>
What about the clock speed of the processor? Default settings for the
EDB7111 is 73.728MHz. So, I assume that redboot must be set to this
since the Redboot user guide seems to use mostly default values. Is
this likely to cause a problem if I need my eCos program to run at
18.432MHz? But, I would think that since eCos is the last system to
start up, the CPU should be set to 18.432MHz instead of what redboot
wanted it to be.
I think I'm just grasping for solutions to my PCMCIA controller problem!
lol I haven't worked on it in quite awhile because I think I need more
information. It's out of production, what do you expect!! It doesn't
look very promising, that's for damn sure.
-----Original Message-----
From: ecos-discuss-owner@sources.redhat.com
[mailto:ecos-discuss-owner@sources.redhat.com] On Behalf Of Jonathan
Larmour
Sent: Monday, August 13, 2001 10:53 AM
To: Trenton D. Adams
Cc: 'eCos Disuss'
Subject: Re: [ECOS] program doesn't work with new redboot
"Trenton D. Adams" wrote:
>
> I recompiled redboot again, and I don't get the ignoring packet error.
>
> My program still locks up though. I'm going to try and figure it out
> myself first. I do have a question though.
>
> Is there any way that compilation options for redboot would affect the
> running of my eCos program?
Not in general.
Jifl
--
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223)
271062
Maybe this world is another planet's Hell -Aldous Huxley ||
Opinions==mine