This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: Port to XScale board
- To: Cristiano Ligieri Pereira <cpereira at ics dot uci dot edu>
- Subject: RE: [ECOS] Port to XScale board
- From: Gary Thomas <gthomas at redhat dot com>
- Date: Mon, 20 Aug 2001 20:37:07 -0600 (MDT)
- Cc: ecos-discuss at sourceware dot cygnus dot com
- Organization: Red Hat, Inc.
On 21-Aug-2001 Cristiano Ligieri Pereira wrote:
>
> No. I made it run from RAM only. Then I'm loading RedBoot using Cygmon and
> trying to download an eCos application using Redboot. Isn't it a good
> approach? I actually do it running eCos on the ipaq...
>
Well, RedBoot can more than replace Cygmon [plus it's what we're
supporting now] Perhaps some of your other problems would go away
if you were running in that mode.
That has nothing to do with the X-modem download problems you are
experiencing though.
> Cristiano.
>
> ------------------------------------------------------------
> Cristiano Ligieri Pereira - http://www.ics.uci.edu/~cpereira
>
> On Mon, 20 Aug 2001, Gary Thomas wrote:
>
>>
>> On 21-Aug-2001 Cristiano Ligieri Pereira wrote:
>> >
>> >> Either. Your example implies binary, but I'm not so sure about
>> >> it anyway. If this is the "Hello world" example we talked about
>> >> last week, shouldn't you be downloading it at 0x20000?
>> >
>> > 0x20000 is where RedBoot is running. So I'm assuming I have to put the
>> > application somewhere else and thus I'm compiling it accordingly.
>>
>> You don't have RedBoot running from ROM/FLASH?
>>