This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]

RE: memory map question


Note: email sent directly to eCos engineers which is not copied to
the eCos discussion list can and will be ignored.

It looks like MLT (ConfigTool) didn't setup your .ldi file correctly.

On 24-Aug-2001 Simpkins, Andy wrote:
> 
> 
>> -----Original Message-----
>> From: Gary Thomas [mailto:gthomas@redhat.com]
>> Sent: 24 August 2001 15:16
>> To: Simpkins, Andy
>> Cc: ecos-discuss@sourceware.cygnus.com
>> Subject: RE: [ECOS] memory map question
>> 
>> 
>> 
>> On 24-Aug-2001 Simpkins, Andy wrote:
>> > Hi there,
>> > 
>> > I am trying to map some data to a specific address in FLASH 
>> on my custom
>> > target board (ARM7TDMI core)
>> > 
>> > The data is defined as 
>> > 
>> > unsigned char globalArchive[] __attribute__ ((section 
>> (".ivoryDataStore")))
>> > =
>> >    {0x04, 0x18, 0x00, 0x00, 0x81);
>> > 
>> > 
>> > I have added the following to arm.ld 
>> > 
>> >#define SECTION_ivoryDataStore(_region_, _vma_, _lma_) \
>> >     .ivoryDataStore _vma_ : _lma_ \
>> >     { FORCE_OUTPUT; *(.ivoryDataStore) } \
>> >     > _region_
>> > 
>> > And have attempted to define ivoryDataStore in my memory 
>> map of the config
>> > tool (1.3.1)
>> > I kind of hoped that the name would have shown up in the 
>> drop down box for
>> > Linker-defined, as it didn't I had to specify it as user defined...
>> > 
>> > i.e. 
>> >       Name - User-defined: ivoryDataStore
>> >            - Known Size: 0x2000
>> >       Final Location (VMA) - Absolute: 0xe0000
>> > 
>> > however when I compile my code I get the following :
>> > 
>> > 
>> > arm-elf-gcc *.o ../../API/*/*.o -L /i/eCOSbuilds/a166_install/lib/
>> > -Ttarget.ld -nostdlib -Xlinker -Map -Xlinker mapfile.txt
>> > /tools/H-i686-pc-cygwin/arm-elf/bin/ld: warning: no memory 
>> region specified
>> > for
>> > section `.ivoryDataStore'
>> 
>> Does .ivoryDataStore end up in your "target.ld" file (the 
>> linker script)?  If
>> not, it's a problem with the macros & sections.
>> 
> 
> not quite, I get 
> 
> __ivoryDataStore = 0xe0000; . = __ivoryDataStore + 0x20000;
> 
> where as the items that apper in the eCos config tool as 'linker defined'
> look like
> 
> .rodata   ALIGN (0x4)  :      { . = . ; *(.rodata*) } >  rom
> 
> I assumed that this is because the code is at an absolute address, however I
> can not understand why I get a doubble underscore at the start instead of a
> period...
> 
> 
> Andy


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]