RE: [ECOS] RE: Running a program from

["Trenton D. Adams" <tadams at theone dot dnsalias dot com>]

I know, my outlook screwed up.  eCos Discussion was supposed to be the
first one in my list, but Outlook seems to like to change that once in
awhile.  Don't know if you received it yet or not, but I did send an
apology already! :)  I also reposted it to the eCos Discussion list!

Linker script?  I assume you mean my Makefile?  Nope, didn't even think
about changing the entry point if that's what you mean!

I have now changed my GCC line to contain "-Wl,--entry=0xe0040000".  Is
that what you mean?

Still doesn't work.

-----Original Message-----
From: ecos-discuss-owner@sources.redhat.com
[mailto:ecos-discuss-owner@sources.redhat.com] On Behalf Of Gary Thomas
Sent: Friday, August 24, 2001 11:15 AM
To: Trenton D. Adams
Cc: eCos Discussion
Subject: [ECOS] RE: Running a program from


Firstly - don't send messages to ecos-maintainers use ecos-discuss.

On 24-Aug-2001 Trenton D. Adams wrote:
> I do the following after loading my image into redboot at 0x20000.
I'm
> not running a RAM version of RedBoot so this should be ok at 0x20000
> right?
> RedBoot> fis create -b 0x20000 -l 0x64700 -f 0xe0040000 RigSystem
> ... Erase from 0xe0040000-0xe00c0000: ....
> ... Program from 0x00020000-0x00084700 at 0xe0040000: ....
> ... Erase from 0xe0fe0000-0xe1000000: .
> ... Program from 0x00fa7000-0x00fc7000 at 0xe0fe0000: .
> RedBoot> go 0xe0040000

Was this program configured for ROM startup?  Did you adjust the
linker script so that it would run from 0xE0040000?