This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]

Re: tftp downloading.


hi jifl,
       We were able to download Image and also execute using GDB for pc
machine.

 We were not able to the download using tftp but were able to the same using
raw option  provide in the load command .Then we invoked GO commands.
The system seem to Hang Up.
Please , Give your input to proceed further.

Regards
Singh



----- Original Message -----
From: "Gangadhar Singh" <gangadhar@deccanetworld.com>
To: "Jonathan Larmour" <jlarmour@redhat.com>
Cc: <ecos-discuss@sourceware.cygnus.com>
Sent: Monday, October 22, 2001 12:27 PM
Subject: Re: [ECOS] Exit Info


> hi jifl,
>     Thanks for your comments on using std library.
> For Ur query
>   Que 1) Also the final exit from the main code is not happening in the
> normal way.
>     Its going into infinite loop.
>
> What do you expect it to do?
>
>  Ans : When we press ctrl c we are not getting the control back to the gdb
> and
> The target system should be restarted again to start again.
>
> 2 Que )  When we put break points for debugging ,
>    we get following mesg "hal_arch_default_isr:32 ( data:0)" for every
> single / next step execution.
>
> How do we avoid this display on the console running gdb .
>
> Also printf is not printing "Hello world ". Do we need to attached a
serial
> i/o
> terminal to the target machine to get the message displayed.
>
>
> Thanks in advance
>
> Regards
> Singh


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]