This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: trouble in loading the file (II)
- To: "cguwinds" <cguwinds at mail2000 dot com dot tw>
- Subject: Re: [ECOS] trouble in loading the file (II)
- From: Dmitry Ryzhkov <rdim_outside at softhome dot net>
- Date: Tue, 23 Oct 2001 00:07:15 +0200
- Cc: ecos-discuss at sourceware dot cygnus dot com
- Organization: Me
- References: <1003772800.78240.cguwinds@mail2000.com.tw>
- Reply-To: rdim_outside at softhome dot net
I have already experienced the such problem on pc. Solution is to use
-c <port#> in load command:
RedBoot>load -c 0 -m x
This is new addition made and, as I know, not reflected in doc - you can find
it only in discussion archive and in ChangeLog
Dmitry.
> hi~
> I want to test a ecos program on the redboot,
> but I get trouble in loading the file to redboot with the serial port.
> When I execute the load command,it will be timeout on redboot side.
>
> My evironments:
> 1.redboot floppy:import ecos_FLOPPY.ecm to build(In fact,I want to import
> ecos_RAM.ecm but I can't find it.),and boot on i686 pc 2.serial
> protocol:x-modem,38400,8N1,no flow control
> 3.ecos program:ecos hello program,Srec format,size 61k
> 4.
> host A:boot with Redboot floppy
> host B:redhat 6.2 minicom 1.83.0
>
> I want to load the ecos hello program from B to A.
> On host B,I sent the ecos test file(hello.srec).
> On host A,I use the command "load -m x"
>
> but the error message "CCCCCCC§§§§§can't load '....':Timed out" appears on
> the host A How can I resolve this problem?
>
> thank you,
> Lion
>
> ----== Mailed via Openfind ==-----
> http://mail2000.com.tw/ 提供免費電子郵件信箱